OSRAM ELEMENT 28/220-240/700 G3
Product family features
- Fixed output (no dimming)
- Input voltage: 220 - 240 VAC
- Suitble for Class I/II luminaires
- Output current range 150-1050 mA
- Up to 30000 h lifetime at tcmax = 80°C
- Typ. Efficiency: from 82% to 90% depend on different wattage
- SELV
- Ambient temp range, ta: -20°C to +50°C
Product family benefits
- Safety ensured by OSRAM (SELV)
- 3 years guarantee
- High quality of light with ripple current < 5%
Areas of application
- Spot light and down kight
- Panels
- Other indoor LED luminaires
Electrical data
- Nominal voltage : 220…240 V
- Mains frequency : 50…60 Hz
- Input voltage AC : 198...264 V
- Total harmonic distortion : < 20 %
- Power factor : 0.97
- Efficiency in full-load : 88 %
- Device power loss : 3.8W
- Protective conductor current : <0.7 mA
- Inrush current L : < 9.3 A
- Max. ECG no. on circuit breaker 10 A (B) : 28
- Max. ECG no. on circuit breaker 10 A (C) : 42
- Max. ECG no. on circuit breaker 16 A (B) : 45
- Max. ECG no. on circuit breaker 16 A (C) : 68
- Max. ECG no. on circuit breaker 25 A (B) : 70
- Surge capability (L/N-Ground) : 2 kV
- Surge capability (L-N) : 1 kV
- Nominal output voltage : 21…40 V
- U-OUT (working voltage) : 60 V
- Nominal output current : 700 mA
- Output current tolerance : ±7.5 %
- Output ripple current (100 Hz) : < 5 %
- Output PSTLM : ≤1
- Output SVM : ≤0.4
- Nominal output power : 14.7…28 W
- Maximum output power : 20 W
- Galvanic isolation : SELV
- Input voltage DC: -
- Galvanic isolation primary/secondary : SELV
- Current set : Fixed current
- Mounting hole spacing, length : 94.0 mm
- Mounting hole spacing, width : 34.7 mm
- Product weight : 66.60 g
- Cable cross-section, input side : 0.5…1.5 / 0.75…1.5 mm²
- Cable cross-section, output side : 0.5…1.5 / 0.75…1.5 mm²
- Wire preparation length, input side : 7…8 mm
- Wire preparation length, output side : 7…8 mm
- Length : 103.0 mm
- Width : 43.0 mm
- Height : 29.0 mm
Temperatures & operating conditions
- Ambient temperature range : -20…+50 °C
- Maximum temperature at tc test point : 80 °C
- Max.housing temperature in case of fault : 110 °C
- Temperature range at storage : -40…+85 °C
- Permitted rel. humidity during operation : 5…85 %
Lifespan
- ECG lifetime : 30000 h / 50000h
Capabilities
- Dimmable : No
- Overheating protection : No
- Overload protection : Automatic reversible
- Short-circuit protection : Automatic reversible
- No-load proof : Automatic reversible
- Intended for no-load operation : No
- Max. cable length to lamp/LED module : 2.0 m
- Suitable for fixtures with prot. class : I / II
- Type of connection, input side : Push terminal
- Type of connection, output side : Push terminal
- Suitable for through-wiring : No
- Number of channels : 1
Certificates & standards
- Approval marks – approval : CE / CCC / RCM / ENEC 25
- Standards : Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 61000-3-3
- Type of protection : IP20
- Protection class : I,II
Sorry, currently do not have any video uploaded.