MEANWELL 480W CONSTANT CURRENT MODE LED DRIVER - HLG-480H-C SERIES - HLG-480H-C2100

• HLG-480H-C2100

• Constant current mode output
• Metal housing with class I design
• Built-in active PFC function
• IP67/IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off, isolated design) ; Smart timer dimking; Low temperature light-on; Junction box
• Typical lifetime >62000 hours
• 7 years warranty

• LED Harbour 
• LED greenhouse lighting
• LED statium lighting
• LED mining lighting
• Type ''HL'' for use in Class I, Division 2 hazardous (Classified) location.

• HLG-480H-C series is a 480W LED AC/DC driver featuring the constant current mode and high voltage output. HLG-480H-C operates from 90~305VAC and offers models with different rated current ranging between 1400mA and 3500mA. Thanks to the high efficiency up to 95%, with the fanless design, the entire series is able to prepare for -40°C ~ +90°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows their series to fit both indoor and outdoor applications. Moreover, the innovative environments in almost spots that may install LED luminaires in the wotld. HLG-480H-C is equipped with various function options, such as dimminh methodologies, so as to provide the optimal design flexibility for LED lighting system.

• Model : HLG-480H-C2100

• Rated current : 2100mA
• Rated power :  481W
• Constant current region : 114 ~ 229V
• Open circuit voltage : 280V
• Current adj. range : Adjustable for A/AB-Type only (via built-in protentiometer) / 1050 ~ 2100mA
• Current ripple : 5.0% max. @rated current
• Current tolerance : ±5%
• Set up time : 500ms/115VAC, 230VAC

• Voltage range : 90 ~ 305VAC 127 ~ 431VDC
• Frequency range : 47 ~ 63Hz
• Power factor : PF≧0.98/115VAC, PF≧0.97/230VAC, PF≧0.95/277VAC @full load
   (Please refer to ''POWER FACTOR (PF) CHARACTERISTIC'' section)
• Total harmonic distortion : THD< 20% (@ load≧40% /115VAC, 230VAC, 277VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
• EFFICIENCY (Typ.) : 95%
• AC current : 12V : 3.5A/115VAC 1.6A/230VAC 1.45A/244VAC
• Inrush current : COLD START 35A(twidth=1800 s measured at 50% Ipeak) at 230VAC; Per NEMA 410
• Max. No. of PSUs on 16A Circuit breaker : 2 unit(circuit breaker of type B) / 3 units(circuit breaker of type C) at 230VAC
• Leakage current : <0.75mA / 277VAC

• Short circuit : Constant current, recovers automatically after fault condition is removed
• Over voltage : 289 ~ 322V / Shut down o/p voltage, re-power on to recover
• Over temperature : Shut down o/p voltage, re-power on to recover

• Working temp. : Tcase=-40 ~ +90℃(Please refer to ''OUTPUT LOAD vs TEMPERATURE'' section)
• Max. case temp. : Tcase=+90℃
• Working humidity : 20 ~ 95% RH non-condensing
• Storage temp. humidity : -40 ~ +80℃, 10 ~ 95% RH non-condensing
• Temp. coefficient : ±0.02%/℃ (0 ~ 60℃)
• Vibration : 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

• Safety standards : UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; 
  GB19510.14,GB19510.1; IP65 or IP67, EAC TP TC 004,AS/NZS IEC 61347.2.13:2013,AS/NZS 61347.1:2016 approved
• Withstand voltage : I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
• Isolation resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
• EMC emission : Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧50%); BS EN/EN61000-3-3; GB17743, GB17625.1, EAC TP TC 020
• EMC immunity : Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020

• MTBF : 1350.9K hrs min. Telcordia SR-332(Bellcore) ; 110.5K hrs min. MIL-HDBK-217F (25℃)
• Dimension : 262*125*43.8mm (L*W*H)
• Packing : 2.8Kg;4pcs/12.2Kg/0.55CUFT