MEANWELL 70~100W CONSTANT CURRENT MODE LED DRIVER - ELG-100-C series - ELG-100-C1050
Features
- Constant current mode output
- Metal housing design with fucntional ground
- Built-in active PFC function
- No load / Standby power consumption <0.5W
- IP67/IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
- Typical lifetime>50000 hours
- 5 years warranty
Application
- LED street lighting
- LED harbor lighting
- LED bay lighting
- LED greenhouse lighting
- LED flood lighting
- Type ''HL'' for use in Class !, Division 2 hazardous (Classified) location.
Description
ELG-100-C series is a 100W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-100-C operates from 100~360VAC and offers models with different rated current ranging between 360mA and 1400mA. Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-100-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
SPECIFICATION
Output
- Rated current : 1050mA
- Rated power : 200VAC~305VAC / 99.75W / 100VAC~180VAC / 70.35W
- Constant current region : 48 ~ 95V
- Open circuit voltage : 105V
- Current adj. range : Adjustable for A/AB- Type only (via built-in potentiometer) / 525 ~ 1050mA
- Current ripple : 5.0% max. @ rated current
- Current tolerance : ± 5.0%
- Set up time : 1000ms/115AC / 500ms/230VAC
Input
- Voltage range : 100 ~ 305VAC / 142 ~ 431VDC continue, 350VAC for 24Hrs; 360VAC for 1Hr
- Frequency range : 47 ~ 63Hz
- Power factor : PF ≧ 0.97/115VAC, PF ≧ 0.92/277VAC @ full load
- Total harmonic distortion : THD < 20% (@load ≧ 50%/115VC; @load ≧60%/230VAC; @load ≧ 78%/277VAC)
- Efficiency : 90%
- AC current : 1.1A/115VAC / 0.6A/230VAC / 0.5A/277VAC
- Inrush current : Cold start 40A (width=760 μs measured at 50% peak)/230VAC; Per NEMA410
- Max No. of PSUs on 16A circuit breaker : 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
- Leakage current : <0.75mA / 277VAC
- No load / standbby power consumption : No load power consumption <0.5Q for blank / A / Dx / D2-type / Standby power consumption <0.5W for B / AB / DA-type
Protection
- Short circuit : Hiccup mode, recovers automatically after fault condition is removed
- Over voltage : 110 ~ 130V / Shut down o/p voltage, re-power on to recover
- Over temperature : Shut down o/p voltage, re-power on to recover
Environment
- Working temp. : Tcase=-40 ~ +90°C
- Max. case temp. : Tcase=+90°C
- Working humidity : 20 ~ 95% RH non-condensing
- Storage temp. humidity : -40 ~ +80°C, 10 ~ 95% RH
- Temp. coefficient : ± 0.03%/ °C (0~60°C)
- Vibration : 10 ~ 500Hz, 5G 12min,/1 cycle, period for 72min. each along X, Y, Z axes
Safety & EMC
- UL8750 (type ''HL''), CSA C22.2 No. 250.13-12;BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BIS IS15885 (for 700A, 1050A only); GB19510.1, GB 19510.14; IP65 or IP67; KC61347-1, KC61347-2-13 approved
- DALI standards : Compliance to IEC62386-101,102, (207 by request) for DA type only
- Withstand voltage : I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG1.5KVAC
- Isolation resistance : I/P-O/P,I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
- EMC emission : Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load ≧ 60%) ; BS EN/EN61000-3-3; gB17743, GB17625.1 ; EAC TP TC 020; KC KN15, KN61547
Others
- MTBF : 1087.5K hrs min. Telcordia SR-332 (Bellcore) 300.6Khrs min. MIL-HDBK-217F (25°C)
- Dimension : 199*63*35.5 mm (L*W*H)
- Packing : 0.85kg; 16pcs/14.2kg/0.72CUFT
Sorry, currently do not have any video uploaded.
